Your cart is empty

Trex G800F Aerial Gimbal System Combo Align H80B036XXW

$1,699.99

 

 

 

Trex G800F Aerial Gimbal System Combo Align H80B036XXW

Trex G800F Aerial Gimbal 1

Trex G800F Aerial Gimbal is an upgrade product catered specifically for the needs of aerial photography. We also have G800 Aerial Gimbal System for your comparison.

Trex G800F Aerial Gimbal

Trex G800F Aerial Gimbal 3

Trex G800F Aerial Gimbal Instruction:

  • Align G800F gimbal is an upgrade product catered specifically for the needs of aerial photography. The included GS850 gimbal controller features high power computing capability, and various control modes to precisely lock into the shooting object, as well as meet the needs of various other aerial photography needs, allowing optimal imagery to be obtained easily. This system must be used in conjunction with Align's APS gyro and T-Rex 800E. Fiberglass composite material matched with high strength aluminum alloy to form the gimbal backbone, featuring high precision, high stability, capable of high payload, and is able to sustain hard landing of helicopter. When paired with 540 degrees DS815 servo and belt transmission design, the gimbal is capable of wider turning angles with higher precision.
  • Unique gimbal support assembly design, with aesthetic pleasing clean look, featuring high precision and slop free and makes the camera lens maintain at the same angle in flight.
  • Shock absorbing dampners designed specifically for Align G800F gimbal system, posses superior vibration dampening effect, and various spring tensions can be used according to payload.
Focus Shot1(Fiberglass composite material matched with high strength aluminum alloy to form the gimbal backbone) Focus Shot2(High rigid gimbal bottom plate and gimbal camera tray supporting pole that featuring high precision, high stability, capable of high payload, and is able to sustain hard landing of helicopter) Focus Shot3(Utilizes with 540 degrees DS815 servo and belt transmission design, the gimbal is capable of wider turning angles with higher precision)
Trex G800F Aerial Gimbal 3
Trex G800F Aerial Gimbal Camera Tray
Trex G800F Aerial Gimbal belt transmission design
Focus Shot4(New GS850 Controller support with 5 operating modes and various functions as usual, further equipped with built-in PAN, ROLL and TILT gain dials enable immediate attitude compensating reaction based on different weight of photograph equipment. Featuring much higher degree of control precision) Focus Shot5(Unique gimbal support assembly design, with aesthetic pleasing clean look, featuring high precision and slop free and makes the camera lens maintain at the same angle in flight) Focus Shot6(Shock absorbing dampers designed specifically for Align G800F gimbal system, and various spring tensions can be used according to payload)
Trex G800F Aerial Gimbal System 3
Trex G800F Aerial Gimbal support assembly
Trex G800F Aerial Gimbal absorbing dampers

Trex G800F Aerial Gimbal Specification:

  • Characteris Tic: Soft Start
  • Rating Voltage:DC4.8~7.4V
  • Temperature Range: minus 20degree ~60degree ( minus 20 degree ~140℉)
  • Operating Range:540 degree (1000~2000us)
  • Broadband Systems:1500μs
  • Stall Torque:15kg.cm(4.8V):18kg.cm(6V) :20kg.cm(7.4V)
  • Motion Speed:0.15sec/60 degree (4.8V)  0. 13sec/60 degree (6V)  0.11sec/60 degree (7.4V)
  • Dimension:40.1x20.1x20.7mm
  • Weight:66g
Focus Shot7(Gimbal Accessory) Focus Shot8(Gimbal Shock Accessory) Focus Shot9(Gimbal Camera Pad )
Trex G800F Aerial Gimbal Gimbal accessory
Trex G800F Aerial Gimbal gimbal shock accessory
Trex G800F Aerial Gimbal Camera pad
Focus Shot10(ESC Mount) Focus Shot11 (GS850 Controller) Focus Shot12 (DS815 HV Robor Srevo)
Trex G800F Aerial Gimbal ESC mount
Trex G800F Aerial Gimbal Controller
Trex G800F Aerial Gimbal Servo

GS850 CONTROLLER Specification:

  • Rating Voltage:DC4.8~8.4V
  • Temperature Range:-20 degree C~65 degree C (-4 degree ~140 degree F )
  • Operating Current Consumption:55mAat 6V(ROLL)   40mAat 6V(PAN)
  • Maximum Control range:(ROLL) plus or equal to 30 degree   (PAN) plus or equal to 90 degree :(TILT) plus or equal to 90 degree
  • Maximum Control rotation Speed:(ROLL) 60 degree / s  :(PAN) 150 degree / s  :(TILT) 150 degree / s
  • Dimension:42.7x 30 x 14.2mm
  • Weight:11g

T-REX 800E DFC Features:

  • Gimbal features Fiberglass composite material composite material matched with high strength aluminum alloy to form the backbone, featuring high precision, high stability, high payload capability, and is able to sustain hard landing of helicopter.
  • Utilizes 540 degrees DS815 high voltage robotic servos, supporting 2s 7.4v input voltage. Special slow start feature to avoid jerky start-ups.
  • Unique gimbal support assembly design, with aesthetic pleasing clean look, featuring high precision and slop free and makes the camera lens maintain at the same angle in flight.
  • Shock absorbing dampners designed specifically for Align G800F gimbal system, posses superior vibration dampening effect, and various spring tensions can be used according to payload.
  • New GS850 Controller support with 5 operating modes and various functions as usual, further equipped with built-in PAN, ROLL and TILT gain dials enable immediate attitude compensating reaction based on different weight of photograph equipment. Featuring much higher degree of control precision.
  • Simple to setup. Complete setup can be done with two steps.
  • Unique rescue mode, to minimize photography equipment damage during a crash.
  • Supports lens zoom in and zoom out feature.
  • Supports shutter activation. Follow the instruction to connect shutter with GS850 controller, shutter can be activated via transmitter stick through GS850.
  • Supports Spektrum/JR satellite receivers and Futaba S.BUS architecture.
  • Upgradeable firmwareinterface, allowing firmware updates through interface cable.
  • Must be used in conjunction with Align APS gyro and 3GX flybarless system, enabling gimbal control system to achieve high stability and excellent controllability.

Trex G800F Aerial Gimbal 1

Trex G800F Aerial Gimbal Package Included:

  • G800F GIMBAL x 1 set
  • G800 Gimbal Support Assembly x 1 set
  • G800 Gimbal Accessory x 1 set
  • G800 Gimbal Camera Pad x 2 pcs
  • GS850 Controller x 1 set
  • DS815 HV Robor Srevo x 3 set
  • ESC Mount x 1 pcs
  • G800 Gimbal Shock Absorbers Assembly x 1 set
  • G800 Gimbal Shock Accessory x 1 set 

Add to Cart:

  • Model: Align-H80B036XXW
  • Manufactured by: Align



This product was added to our catalog on Wednesday 07 August, 2013.

walitefree