Your cart is empty

Trex 250 Pro DFC KX019011 Super Combo RC helicopter

$399.99

 

 

 

Trex 250 Pro DFC KX019011 Super Combo RC helicopter

Trex 250 Pro DFC 1

Trex 250 Pro DFC Specification:

  • Length:431mm
  • Height:162mm
  • Main Blade Length:205mm
  • Main Rotor Diameter:460mm
  • Tail Rotor Diameter:108mm
  • Motor Ponion Gear:15T
  • Main Drive Gear:120T
  • Tail Drive Gear:28T
  • Drive Gear Ratio:1:8:4.28
  • Weight(w/o power system):150g

Focus Shot 1(The Trex 250 Pro DFC flybarless rotor head system utilizes extreme low CG design, effectively reduces resistance during flight, increased flight responsiveness and precision)

Trex 250 Pro DFC 2

Focus Shot 2(New battery mounting platform with integrated mount for ESC for ease of install and wire management)

Trex 250 Pro DFC 3

Focus Shot 3(3K side plates with imbedded material technology, allowing servos to be installed without a nut)

Trex 250 Pro DFC 4

Focus Shot 4(New style gyro mount with integrated rudder servo mount for centralized CG, advantageous to 3D flying, imbedded side frame rudder mount rail design, for ease of maintenance)

Trex 250 Pro DFC 5

Focus Shot 5(New style metal swashplate)

Trex 250 Pro DFC 6

Focus Shot 6(New style frame base plate with access window to gyro adjustment)

Trex 250 Pro DFC 7

Focus Shot 7(Utilizes dual point attachment design for zero play and higher precision control feel)

Trex 250 Pro DFC 8

Focus Shot 8(New style single piece tail gear box )

Trex 250 Pro DFC 9

Trex 250 Pro DFC Standard Equipment

Trex 250 Pro DFC 10

Trex 250 Pro DFC 11

Trex 250 Pro DFC 12

Trex 250 Pro DFC Accessories:

  • T-REX 250 PRO DFC Kit Set x 1 set
  • 250DFC Main Rotor Head Upgrade Set x 1set
  • 3GX Programmable Flybarless System x 1 set
  • 205 main blades x 1set
  • 205D Carbon main blades x 1set
  • RCE-BL15X 15A Brushless ESC x 1
  • (Build-in 5~6V adjustable BEC)
  • RCM-BL250MX(3600KV) Brushless motor x 1
  • Motor ponion gear 15T x 1
  • DS425M Digital servo x 1
  • DS415M Digital servo x 3
  • Clip x 1
  • No.00 Philips screw driver x 1
  • 0.9mm Hex head wrench x 1
  • 1.3mm HSS Hexagon screw driver x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge x 1
4.11.1V 3S Li-Po 850mAh battery x 1


Add to Cart:

  • Model: Align-KX019011
  • Manufactured by: Align



This product was added to our catalog on Thursday 06 December, 2012.

walitefree