TAROT ZYX gyro firmware upgrade

Firmware upgrade instruction

  • 1.Connect the ZYX gyro to PC by ZYX USB adapter,click “Connect ZYX”,make sure it succeed.
  • 2.Open the Firmware in ZYX PC software.
  • 3.Keep the PC,USB adapter and ZYX gyro connecting.Power off ZYX gyro,press “SET” button of gyro and power on.
  • 4.The red lamp is flashing,click “Upgrade” button to start upgrade,the ZYX gyro will restart after successful upgrade.
  • 5.Please make sure your gyro is Tarot ZYX,otherwise the gyro will be damaged.The ZYX gyro does not need to be setup again.

 

Leave a Reply

Your email address will not be published. Required fields are marked *