Your cart is empty

Align RH45E09AW 450 Plus DFC BTF Helicopter

$493.99

 

 

 

Align RH45E09AW 450 Plus DFC BTF Helicopter

Align RH45E09AW heli

Align RH45E09AW,  the newest Trex Helicopter, you may need Trex 450 Plus DFC RH45E09XW to take a comparison.Align RH45E09AW 2

Align RH45E09AW Instruction:

  • T-REX 450 has been the ideal choice for entry level R/C helicopters and T-REX 450 PLUS is designed for beginners. The fully assembled helicopter can be flown immediately just by plugging in a charged battery, allowing the pilot to bypass assembly and adjustment process. This T-REX 450 PLUS DFC is a helicopter that utilizing flybarless system.
  • The helicopter utilizes DFC rotor head assembly, paired with 3GX MRS flybarless system optimized for T-REX 450 PLUS flight characteristics. Without any adjustment or tuning, this combo will provide optimal stability suitable for pilots of all levels.
  • For those enthusiasts who wish to fine tune 3GX MRS even further, it can be done through a few simple steps. In addition, 3GX MRS has a FHSS 2.4GHz receiver built in , compatible Spektrum DSM2/DSMX and JR DSM2 satellite receiver, providing an all in one package.
  • With the addition of the brand new 3GX MRS, the T-REX 450 PLUS DFC pushes past the performance limitation of flybar helicopter, improving both stability and 3D performance, while maintaining a down to earth price level
Focus Shot1(Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed.) Focus Shot2(New 450DFC CCPM Swashplate and main shaft bearing block) Focus Shot3(Brand new battery mount with integrated ESC mount)
Align RH45E09AW Rotor head
Align RH45E09AW swashplate
Align RH45E09AW battery mount
Focus Shot4(Newly designed 4 piece upper / lower plate frame system) Focus Shot5(Newly designed servo mount & high precision helical main gear) Focus Shot6(Newly designed rudder servo mount & dedicated rudder gyro mounting platform)
Align RH45E09AW upper/ lower plate frame
Align RH45E09AW helical main gear
Align RH45E09AW rudder servo mount
Focus Shot7(New style frame base plate with access window to gyro adjustment) Focus Shot8(Hoop style horizontal fin mount with longer tail boom supports) Focus Shot9(High precision tail pitch control assembly)
Align RH45E09AW frame base plate
Align RH45E09AW horizontal fin mount
Align RH45E09AW tail control

Align RH45E09AW Features:

  •  T-REX 450 PLUS DFC BTF(Bind To Fly) complete package was assembled and tuned at the factory. Suitable for Futaba S-FHSS 2.4Ghz system/JR DSM2 and Spektrum DSM2/DSMX system transmitter to bind and fly.
  • Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed.
  • Equipped with newly released 3GX MRS flybarless system, with FHSS 2.4GHz buit in receive function, support Spektrum DSM2/DSMX or JR DSM2 satellite. For simpler and more direct setup, with setting optimized for T-Rex 250 Plus DFC, resulting in more stable and more preferable control feel than ever before.
  • Four piece frame plate design with imbedded servo mounting platform for fast servo install/removal without mounting nuts.
  • Narrow lower frame plate and base plate design to strengthen rigidity and improve flight agility.
  • Specially designed in-between frame rudder servo mount for centralized CG location to benefit 3D flying, while minimizing crash damages to rudder servo
  • Equipped with MX series high efficiency brushless motor, with dramatically improved cooling efficiency for excellent power output.
  • Equipped with new style REC-BL35P brushless controller featuring step-less adjustable BEC voltage between 5V to 6V .
  • Dedicated rudder gyro mounting platform to isolate vibration from tail transmission, improving gyro performance.
  • Newly designed battery mounting platform with integrated ESC mount for streamlined mounting of electronics.
  • High precision tail pitch control assembly with aesthetically pleasing and functional design. Weighted tail blade grips effectively increases smoothness of rudder pitch action.
  • New style aerodynamic canopy airbrushed with colorful graphics.
Focus Shot10(450MX Brushless Motor(3400KV)) Focus Shot11(3GX MRS Flybarless System) Focus Shot12(325D 3G Carbon Fiber Blades)
Align RH45E09AW 450mx brushless motor
Align RH45E09AW 3gx mrs flybarless system
Align RH45E09AW blade
Focus Shot13(DS415M Digital Servo) Focus Shot14(DS425M Digital Servo) Focus Shot15(RCE-BL35P 35A Brushless ESC)
Align RH45E09AW servo
Align RH45E09AW servo
Align RH45E09AW Brushless ESC

Align RH45E09AW Specification:

  • Length: 634mm
  • Height: 205mm
  • Main Rotor Diameter: 715mm
  • Tail Rotor Diameter: 158mm
  • Motor Drive Gear: 11T
  • Main Drive Gear: 112T
  • Autorotation Tail Drive Gear: 106T
  • Tail Drive Gear: 25T
  • Drive Gear Ratio: 1:11:4.24
  • Flying Weight: Approx. 584g
  • Color carton:27.3x10x6.6cm
  • Outer carton:56x31x28cm ,24sets/ctn

Align RH45E09AW heli 2

Align RH45E09AW Accessories:

  • T-REX 450 Plus DFC Kit Set X1 set
  • 3GX MRS Flybarless System X1 set
  • 325D 3G Carbon blades X1set
  • RCE-BL35P 35A Brushless ESC X1
  • 450MX Brushless motor(3400KV) X1
  • DS415M (Metal Gear)Digital servoX3
  • DS425MDigital servoX1

Radio transmitter and electronic equipment required for assembly:

  • 1.Dial Pitch Gauge or Digital Pitch Gauge
  • 2.Swashplate Leveler
  • 3.3S1P 11.1V 2200 mAh/30C Li-polymer Battery
  • 4.ALIGN T6 of Futaba S-FHSS 2.4G Transmitter or JR/Spektrum 2.4GHz Transmitter

Add to Cart:

  • Model: Align-RH45E09AW
  • Manufactured by: Align



This product was added to our catalog on Tuesday 09 July, 2013.

walitefree