Your cart is empty

Align 600E Pro DFC Super Combo Trex RH60E01AW w/ 3GX FBL System

$1,188.99

 

 

 

Align 600E Pro DFC Super Combo Trex RH60E01AW w/ 3GX FBL System

Align 600E Pro DFC Super Combo, the latest Trex Helicopter, next generation model with Explosive, performance and attractiveness. It has 3GX Flybarless System versus to Trex 600E Pro DFC

Align 600E Pro

Align 600E Pro Introduction:

  • Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot; highest spec 2mm thick carbon fiber plate with patented plastic integration techniques not only strengthen the structure, but also create a neat and clean look; Unique battery latch assembly for stronger mount and easier battery replacement.
  • A power upgrade system designed specifically to bump up the power output of T-Rex 600E Pro by 30% by upgrading the motor from 600MX motor (3300w/5500w) to 750MX/530KV motor (4400w/7260w). The feel as if a turbo charger was added to the helicopter, with dramatic increase of motor torque output, and near bulletproof governing speed of the rotor, while maintaining power consistency throughout the entire flight duration. In addition, the brand new spindle shaft design features enlarged diameter from 6mm to 8mm, with oversized M5x10mm spindle screws to increase the rigidity of the overall rotor head.
  • The unbelievable flying performance and control feel of the T-Rex 600E PRO DFC, along with 750MX(530KV) motor, makes this helicopter the creme of crop amongst all competitors.

Align 600E Pro Features:

Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed. The brand new spindle shaft design features enlarged diameter from 6mm to 8mm, with oversized M5x10mm spindle screws to increase the rigidity of the overall rotor head. Brand new 600E PRO Performance Booster designed specifically to bump up the power output of T-Rex 600E PRO by 30% by upgrading the motor from 600MX motor (3300w/5500w) to 750MX/530KV motor (4400w/7260w). The feel as if a turbo charger was added to the helicopter, with dramatic increase of motor torque output, and near bulletproof governing speed of the rotor, while maintaining power consistency throughout the entire flight duration.
Align 600E Pro Rotor Head Align 600E Pro DFC Motor
Top mounted motor base and imbedded servo mounts. New lightweight H-cross section for electronic equipments.
Align 600E Pro  Servo Mount Align 600E Pro H-cross section
Sliding battery tray rails imbedded into 3K Side frame. Equipped with new high strength CNC M1/118T helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear's anti torsion ability to prevent gear from deforming under extreme power, reducing gear wear and power loss.
Align 600E Pro Sliding Battery Tray Align 600E Pro  Main Gear

Align 600E Pro 3

CNC machined aluminum pieces including servo mount. Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.
Align 600E Pro  Aluminum pieces Align 600E Pro  top view
Rudder servo mount imbedded into 3K Side frame. New carbon tail control pushrod assembly.
Align 600E Pro rudder servo mount Align 600E Pro  tail control
New tail control assembly with dual mounting points, effectively eliminate slop and improve control precision and feel. Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.
Align 600E Pro new tail control Align 600E Pro side view

Trex 600E Pro DFC Specification:

  •  Length: 1160mm
  • Height: 319mm
  • Width: 210mm
  • Main Blade Length: 600mm
  • Main Rotor Diameter: 1347mm
  • Tail Rotor Diameter: 260mm
  • Motor Pinion Gear: 14T
  • Main Drive Gear: 118T
  • Autorotation Tail Drive Gear: 131T
  • Tail Drive Gear: 34T
  • Drive Gear Ratio: 1:8.42:3.85
  • Weight(With Motor): 2840g

Align 600E Pro Accessories:

  • T-REX 600E DFC Kits Set x 1set
  • 600 3G Carbon Fiber Blades x 1set
  • 95 Carbon Fiber Tail Blade x 1set
  • 750MX Brushless Motor(530KV) x 1
  • DS615 Digital servo x 3
  • DS655 Digital servo x 1
  • Castle ICE2 HV 80 Brushless ESC x 1
  • 3GX Flybarless System x 1set

Align 600E Pro Standard equipment

Align 600E Pro Standard equipment:

  • Castle ICE2 HV 80 Brushless ESC x 1
  • 750MX Brushless Motor(530KV) x 1
  • DS615 Digital servo x 3
  • DS655 Digital servo x 1
  • 3GX Flybarless System x 1 Set

Radio transmitter and electronic equipment required for assembly:

  • Transmitter(7-channel or more, helicopter system)
  • Receiver(7-channel or more)
  • 6S Li-Po 2600 ~ 4600mAh X2 (3300mAh suggestion)
  • Digital Pitch Gauge/Dial Pitch Gauge

Align 600E Pro 3GX Programmable FBL


Add to Cart:

  • Model: Trex-RH60E01AW
  • Manufactured by: Align



This product was added to our catalog on Tuesday 05 November, 2013.

walitefree