Your cart is empty

700 Nitro DFC T-rex RH70N01XW RC helicotper Super Combo





700 Nitro DFC T-rex RH70N01XW RC helicotper Super Combo

700 Nitro DFC Review:

700 Nitro DFC with 3GX Programmable Flybarless System adopts 3K carbon plate narrow frame design, simple but very firm, making assembly as well as maintenance expedient. Meanwhile 3GX adopts new high specification gyro sensor, suitable for various harsh environment.  Let's expected the coming of 700 Nitro DFC Heli...

700 Nitro DFC Helicopter

700 Nitro DFC Heli Features:

  • Equipped with DFC flybarless head assembly
  • 3K carbon plate narrow frame design
  • Large diameter clutch assembly
  • Front mounted rudder servo to minimize exhaust contamination.
  • New style H-cross section electronics mounting platform, simple electronics installation
  • larger capacity fuel tank, increasing 3D flight duration.
  • High efficiency tail shaft drive design.
  • High efficiency light weight engine cooling fan to improve cooling efficiency.
  • Main fuel tank designed for stable consistent fuel delivery.
  • New one way bearing housing capable of withstanding high torque.
  • quality airbrushed fiberglass canopy with 4 point anti-vibration mount to acheive fast install and removal.
  • New tail control assembly with dual mounting points
  • Tailboom is extended by 15mm to support the use of 720mm main blades.  When equipped with91 105 or 120 class engine, there will be a noticeable increase both in power and performance.
700 Nitro DFC Rotor Head

700 Nitro DFC heli 2

700 Nitro DFC heli 3

 700 Nitro DFC Heli specification:

  • Length: 1361mm
  • Height: 385mm
  • Main Blade Length: 690mm
  • Main Rotor Diameter: 1562mm
  • Tail Rotor Diameter: 281mm
  • Engine Pinion Gear: 14T
  • Main Drive Gear: 112T
  • Autorotation Tail Drive Gear: 104T
  • Tail Drive Gear: 21T
  • Drive Gear Ratio: 8:1:4.95
  • Fuel Tank Capacity:660cc.
  • Weight(With Power System): Approx. 4200g

700 Nitro DFC heli 4

700 Nitro DFC heli 5

700 Nitro DFC heli 7

700 Nitro DFC 3GX Programmable Flybarless System Feature:

  • Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts.
  • 3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
  • Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.
  • Graphical illustrated instruction on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.
  • Support Bluetooth connectivity. With the soon to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.
  • With 3GX's built in Align RCE-G600 governor function, no external governor is needed to reduce electronic wire clutters.
  • Custom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom settings to be shared amongst friends.
  • 3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines.
  • Suitable for helicopter of all class from 200 to 700, glow engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape.
  • 3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
  • With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.
  • 3GX's rudder allows consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
  • Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, and even autonomous way point flights as well as return home.

700 Nitro DFC heli 8

700 Nitro DFC heli 9

700 Nitro DFC heli 10


700 Nitro DFC heli 11

700 Nitro DFC heli 12

700 Nitro DFC 3GX Programmable Flybarless System Specification:

  • Operating Temperature: minus 10~60 degree
  • X and Y axis Operating Angle Range:minus 300~plus 300 degree
  • Z axis Operating Angle Range:minus 600~ plus 600 degree
  • Size:36.5x25.2x15.6 mm Size
  • Supports Wide/Narrow Bandwidth Digital and brushless servos
  • Spektrum and JR Satellite antennas support (Replaces original factory receiver)
  • Futaba S.BUS system support
  • Built in governor function
  • Maximum working voltage:8.5V
  • Compatible with 1024/2048 resolution Spektrum receivers
  • Supports 90/120/135/140 CCPM swashplates
  • Field setup without the use of a PC
  • Compatible with 2 to 5 blades rotor heads
  • Support up to 6 servos
  • Automatic servo type recognization

Note: Users must have a certain concept of security to operate the R/C helicopters. Be sure to read and comply with related safety notes of instruction manual before flying.

DS615 Digital Servo)                  3GX Programmable Flybarless system 

2 In 1 Voltage regulator combo)                                                

700 Nitro DFC heli 13

700 Nitro DFC heli 14

700 Nitro DFC heli 15


700 Nitro DFC Package Includes:

  • TREX 700 Nitro DFC Kits Set X1
  • 3GX Programmable Flybarless System X1 set
  • Governor Sensor X1 set
  • 690 3G Carbon fiber blades X1
  • 2 In 1 Voltage regulator combo X1 set
  • DS615 Digital servoX3 set
  • DS655 Digital servo X1
  • GP750 Head lock combo X1
  • Aluminum Tail Boom X1

700 Nitro DFC Helicopter

Radio transmitter and electronic equipment required for 700 Nitro DFC Heli assembly:

  • Transmitter(7 channel or more, helicopter system)
  • Receiver(7 channel or more)
  • Standard servo X1 ( for throttle)
  • Engine starter X1
  • Digital pitch gauge X1
  • Fuel pump X1
  • Engine fuel X1
  • Align 91H Engine or 91HP Engine X1
  • 90 Muffler X1

Add to Cart:

  • Model: Trex-700-Nitro-DFC-RH70N01XW
  • Manufactured by: Align

This product was added to our catalog on Wednesday 19 September, 2012.